IC 3

Available in:

Product Specifications

Film-bending machine for PVC and PS Material thickness of 0.25mm to 1mm up to 1250mm
Because of the extreme fast heating and the pressing from both sides, the material does not deform. Heating time of 0.2sec. is enough to bend 0.3mm PVC and hardly it takes 0.7sec to bend 0.8mm.
The heating time is adjustable in 0.1sec. steps. The Microcontroller regulates the heating time. Cooling time for bigger radius are adjustable from 0.1 to 10 seconds.

IC3-600
Max thickness: 2mm variable with material type
Working width: 600mm
Detachable end stop: max till 320mm
Power: 230V 50/60Hz

IC3-1250
Max thickness: 2mm variable with material type
Working width: 1250mm
Detachable end stop: max till 320mm
Power: 230V 50/60Hz

Features

• End stop: 1 mm to 320 mm
• Sidestop: 90 °
• Counter
• Footswitch
• Material Thickness: 0.2 to 1mm
• Working width : 600mm and 1250mm

Videos

Film-bending machine for PVC and PS Material thickness of 0,25mm to 1,5mm can be processed. The latitude of the material may be up to 1250mm (IC3-1250mm).

Because of the extreme fast heating and the pressing from both sides, the material does not deform at all and unobjectionable bending results are the outcomes. In case you use PVC with a thickness of 0,3mm a heating time of 0,2sec. is enough to bend the material. With a thickness of 0,8mm it only needs 0,7sec. to achieve the right temperature.

Caused by the endstop the bend always will be exact alike. The dimensional tolerance is less than 0,1mm.

The heating time is adjustable in 0,1sec. steps. A Microcontroller regulates the heating time. Cooling time for big radii are adjustable from 0,1 to 10 seconds.

The machine is configured in less than 1 minute


Related Products